Dell 5810 PTC Creo Workstation E5-1650 V3 6 Cores 3.5Ghz 32GB 250GB NVMe 2TB M2000 Win 10
Product Code:
638775503268
UPC:
638775503268
Condition:
New
Availability:
Ships within 1-5 Business Days.
SSD:
250GB
Form:
Tower
Speed:
3.5GHz
Other:
Certified for PTC Creo
Memory:
32GB
HDD:
2.0TB
Graphic Card:
NVIDIA Quadro M2000
Model:
Precision T5810
Storage (GB):
2000
Cores:
6
$1,959.00
$364.00
(You save
$1,595.00
)
PTC Creo workstations are designed for optimal performance to give you the power you need to efficiently complete your work. Recommended for performance: Processors Speed – Faster the better. Recommend 3Ghz or higher. Processor Cores – Higher core counts are only utilized when rendering. We recommend 4 cores or more. Memory (RAM) – 20x of your compacted central project file is a good rule of thumb. Recommend 16GB or higher. Storage – Faster drives will improve overall workstation responsiveness. Its recommended to use a SSD for the Operating system and program loading, and HDD for file storage. Graphic Card (GPU) - Dedicated video cards supporting DirectX 11 or later are strongly recommended. This workstation is certified to work with PTC Creo.
Processor: Single Intel Xeon E5-1650v3 Six Core 3.5Ghz Processor 6 Cores, 12 Virtual Cores in Hyperthreading Mode! (Additional processor configurations available)
Memory: 32GB DDR4-2133 Memory. Supports up to 256GB of total memory, Quad channel, 8 DIMM Slots , up to 2133 MHz DDR4 ECC RDIMM memory
PCIe Solid State Drive: 250GB NVMe M.2 SSD with PCIe Adapter Card
Storage: 2TB 7.2K PC SATA Drive
Drive Bays: Two internal 3.5" hard drive bay, one external 5.25" bay, and one external slimline optical bay.
Raid Controller: Intel AHCI 6Gb/s SATA controller with six ports at 6Gb/s, two reserved for optical drives, Intel RSTe supports software RAID 0,1,5,10
Graphics: Nvidia Quadro M2000 4GB GDDR5 Graphic Card, DirectX 12 (Certified Hardware for PTC Creo)
Operating System: Windows 10 Professional 64-Bit Pre-Installed
Software: PTC Creo Software is not included
Power Supply: 425W 90% Efficient wide-ranging, active Power Factor Correction
Optical: DVDRW Drive
Networking Integrated Intel I217 Gigabit Ethernet controller, Single Port. Controller
Slots: 5 full-length slots, 1 half length, two PCIe x16 Gen 3; 1 PCIe x16 Gen 3 wired x8 (half-length); 1 PCIe x4 Gen 2; 1 PCIe x1 gen2; one PCI 32 bit/33MHz
Front Ports: 3 USB 2.0, 1 USB 3.0, 1 Microphone, 1 Headphone, 2 RJ45
Rear Ports: 3 USB 2.0, 3 USB 3.0, 2 PS2, 1 serial, 1 RJ45 (Intel Gigabit Ethernet)
Internal Ports: 3 USB 2.0, 4 SATA/SAS 6Gb/s, 2 SATA 6GB/s (for optical drive(s)), 1 Serial
Peripherals: Power Cable Included. Mouse, Keyboard, and Video Cable Not Included.
Condition: Seller refurbished unit may have minor scratches and scuffs
*Systems are built to order and fully customizable. Please contact us directly to customize a system for you - REQUEST A QUOTE Please note that a stock photo is used and unit may differ depending on configuration.
Dell 5810 PTC Creo Workstation E5-1650 V3 6 Cores 3.5Ghz 32GB 250GB NVMe 2TB M2000 Win 10
$1,959.00
$364.00
(You save
$1,595.00
)
PTC Creo workstations are designed for optimal performance to give you the power you need to efficiently complete your work. Recommended for performance: Processors Speed – Faster the better. Recommend 3Ghz or higher. Processor Cores – Higher core counts are only utilized when rendering. We recommend 4 cores or more. Memory (RAM) – 20x of your compacted central project file is a good rule of thumb. Recommend 16GB or higher. Storage – Faster drives will improve overall workstation responsiveness. Its recommended to use a SSD for the Operating system and program loading, and HDD for file storage. Graphic Card (GPU) - Dedicated video cards supporting DirectX 11 or later are strongly recommended. This workstation is certified to work with PTC Creo.
Processor: Single Intel Xeon E5-1650v3 Six Core 3.5Ghz Processor 6 Cores, 12 Virtual Cores in Hyperthreading Mode! (Additional processor configurations available)
Memory: 32GB DDR4-2133 Memory. Supports up to 256GB of total memory, Quad channel, 8 DIMM Slots , up to 2133 MHz DDR4 ECC RDIMM memory
PCIe Solid State Drive: 250GB NVMe M.2 SSD with PCIe Adapter Card
Storage: 2TB 7.2K PC SATA Drive
Drive Bays: Two internal 3.5" hard drive bay, one external 5.25" bay, and one external slimline optical bay.
Raid Controller: Intel AHCI 6Gb/s SATA controller with six ports at 6Gb/s, two reserved for optical drives, Intel RSTe supports software RAID 0,1,5,10
Graphics: Nvidia Quadro M2000 4GB GDDR5 Graphic Card, DirectX 12 (Certified Hardware for PTC Creo)
Operating System: Windows 10 Professional 64-Bit Pre-Installed
Software: PTC Creo Software is not included
Power Supply: 425W 90% Efficient wide-ranging, active Power Factor Correction
Optical: DVDRW Drive
Networking Integrated Intel I217 Gigabit Ethernet controller, Single Port. Controller
Slots: 5 full-length slots, 1 half length, two PCIe x16 Gen 3; 1 PCIe x16 Gen 3 wired x8 (half-length); 1 PCIe x4 Gen 2; 1 PCIe x1 gen2; one PCI 32 bit/33MHz
Front Ports: 3 USB 2.0, 1 USB 3.0, 1 Microphone, 1 Headphone, 2 RJ45
Rear Ports: 3 USB 2.0, 3 USB 3.0, 2 PS2, 1 serial, 1 RJ45 (Intel Gigabit Ethernet)
Internal Ports: 3 USB 2.0, 4 SATA/SAS 6Gb/s, 2 SATA 6GB/s (for optical drive(s)), 1 Serial
Peripherals: Power Cable Included. Mouse, Keyboard, and Video Cable Not Included.
Condition: Seller refurbished unit may have minor scratches and scuffs
*Systems are built to order and fully customizable. Please contact us directly to customize a system for you - REQUEST A QUOTE Please note that a stock photo is used and unit may differ depending on configuration.
3 Year TekBoost Warranty with Next Business Day Part Replacement. Option to add On-Site Service and/or Upgrade to 5 Years is Available.