HP Z440 PTC Creo Workstation E5-1650 V3 6 Cores 3.5Ghz 32GB 1TB NVMe 2TB M2000 Win 10
Product Code:
638775508461
UPC:
638775508461
Condition:
New
Availability:
Ships within 1-5 Business Days.
SSD:
1.0TB
Form:
Tower
Speed:
3.5GHz
Other:
Certified for PTC Creo
Memory:
32GB
HDD:
2.0TB
Graphic Card:
NVIDIA Quadro M2000
Model:
Z440
Storage (GB):
2000
Cores:
6
$2,039.00
$405.00
(You save
$1,634.00
)
PTC Creo workstations are designed for optimal performance to give you the power you need to efficiently complete your work. Recommended for performance: Processors Speed – Faster the better. Recommend 3Ghz or higher. Processor Cores – Higher core counts are only utilized when rendering. We recommend 4 cores or more. Memory (RAM) – 20x of your compacted central project file is a good rule of thumb. Recommend 16GB or higher. Storage – Faster drives will improve overall workstation responsiveness. Its recommended to use a SSD for the Operating system and program loading, and HDD for file storage. Graphic Card (GPU) - Dedicated video cards supporting DirectX 11 or later are strongly recommended. This workstation is certified to work with PTC Creo.
Processor: Single Intel Xeon E5-1650v3 Six Core 3.5Ghz Processor 6 Cores, 12 Virtual Cores in Hyperthreading Mode! (Additional processor configurations available)
Memory: 32GB DDR4-2133 Memory. Supports up to 128GB of total memory, 8 DIMM slots for DDR4 ECC Registered Memory
PCIe Solid State Drive: 1TB NVMe M.2 SSD with PCIe Adapter Card
Storage: 2TB 7.2K PC SATA Drive
Drive Bays: Up to two 3.5'' or 2.5'' (adapter needed for 2.5'') internal SATA, SAS or SSD hard drives 2 external 52.5'' bays
Raid Controller: On-board RAID Support RAID 0, 1, 10 (Factory integrated)
Graphics: Nvidia Quadro M2000 4GB GDDR5 Graphic Card, DirectX 12 (Certified Hardware for PTC Creo)
Operating System: Windows 10 Professional 64-Bit Pre-Installed
Software: PTC Creo Software is not included
Power Supply: 525W power supply, 85% efficient
Optical: DVDRW Drive
Networking Integrated Intel I218LM PCIe GbE Controller
Slots: Slot 1: PCI Express Gen2 x1 Full-height, Slot 2: PCI Express Gen3 x16 Full-height, Slot 3: PCI Express Gen2 x4 Full-height, Slot 4: PCI Express Gen3 x8 Full Height, Slot 5: PCI Express Gen3 x16 Full-height, Slot 6: PCI 32bit/33MHz Full-height
Front Ports: 4 USB 3.0, 1 Headset, 1 Microphone
Rear Ports: 4 USB 3.0, 2 USB 2.0, 2 PS/2, 1 RJ-45 (NIC), 1 Audio Line-In, 1 Audio Line-Out Serial supported with optional connector on PCI bracket cabled to system board connector
Internal Ports: 2 USB 2.0 ports available with a single 2x5 header The 2x5 header can be converted to a standard (Type-A) USB connector through the use one HP Internal USB Port Kit (EM165AA) This port kit uses one half of the 2x5 header The 2x5 header also supports up to one 15-in-1 Media Card Reader 1 USB 3.0 port available by a 2x10 header
Peripherals: Power Cable Included Mouse, Keyboard, and Video Cable Not Included
Condition: Seller refurbished unit may have minor scratches and scuffs
*Systems are built to order and fully customizable. Please contact us directly to customize a system for you - REQUEST A QUOTE Please note that a stock photo is used and unit may differ depending on configuration.
HP Z440 PTC Creo Workstation E5-1650 V3 6 Cores 3.5Ghz 32GB 1TB NVMe 2TB M2000 Win 10
$2,039.00
$405.00
(You save
$1,634.00
)
PTC Creo workstations are designed for optimal performance to give you the power you need to efficiently complete your work. Recommended for performance: Processors Speed – Faster the better. Recommend 3Ghz or higher. Processor Cores – Higher core counts are only utilized when rendering. We recommend 4 cores or more. Memory (RAM) – 20x of your compacted central project file is a good rule of thumb. Recommend 16GB or higher. Storage – Faster drives will improve overall workstation responsiveness. Its recommended to use a SSD for the Operating system and program loading, and HDD for file storage. Graphic Card (GPU) - Dedicated video cards supporting DirectX 11 or later are strongly recommended. This workstation is certified to work with PTC Creo.
Processor: Single Intel Xeon E5-1650v3 Six Core 3.5Ghz Processor 6 Cores, 12 Virtual Cores in Hyperthreading Mode! (Additional processor configurations available)
Memory: 32GB DDR4-2133 Memory. Supports up to 128GB of total memory, 8 DIMM slots for DDR4 ECC Registered Memory
PCIe Solid State Drive: 1TB NVMe M.2 SSD with PCIe Adapter Card
Storage: 2TB 7.2K PC SATA Drive
Drive Bays: Up to two 3.5'' or 2.5'' (adapter needed for 2.5'') internal SATA, SAS or SSD hard drives 2 external 52.5'' bays
Raid Controller: On-board RAID Support RAID 0, 1, 10 (Factory integrated)
Graphics: Nvidia Quadro M2000 4GB GDDR5 Graphic Card, DirectX 12 (Certified Hardware for PTC Creo)
Operating System: Windows 10 Professional 64-Bit Pre-Installed
Software: PTC Creo Software is not included
Power Supply: 525W power supply, 85% efficient
Optical: DVDRW Drive
Networking Integrated Intel I218LM PCIe GbE Controller
Slots: Slot 1: PCI Express Gen2 x1 Full-height, Slot 2: PCI Express Gen3 x16 Full-height, Slot 3: PCI Express Gen2 x4 Full-height, Slot 4: PCI Express Gen3 x8 Full Height, Slot 5: PCI Express Gen3 x16 Full-height, Slot 6: PCI 32bit/33MHz Full-height
Front Ports: 4 USB 3.0, 1 Headset, 1 Microphone
Rear Ports: 4 USB 3.0, 2 USB 2.0, 2 PS/2, 1 RJ-45 (NIC), 1 Audio Line-In, 1 Audio Line-Out Serial supported with optional connector on PCI bracket cabled to system board connector
Internal Ports: 2 USB 2.0 ports available with a single 2x5 header The 2x5 header can be converted to a standard (Type-A) USB connector through the use one HP Internal USB Port Kit (EM165AA) This port kit uses one half of the 2x5 header The 2x5 header also supports up to one 15-in-1 Media Card Reader 1 USB 3.0 port available by a 2x10 header
Peripherals: Power Cable Included Mouse, Keyboard, and Video Cable Not Included
Condition: Seller refurbished unit may have minor scratches and scuffs
*Systems are built to order and fully customizable. Please contact us directly to customize a system for you - REQUEST A QUOTE Please note that a stock photo is used and unit may differ depending on configuration.
3 Year TekBoost Warranty with Next Business Day Part Replacement. Option to add On-Site Service and/or Upgrade to 5 Years is Available.