HP Z840 PTC Creo Workstation E5-2643 V3 6 Cores 3.4Ghz 32GB 500GB NVMe P4000 Win 10
Product Code:
601818095716
UPC:
601818095716
Condition:
New
Availability:
Ships within 1-5 Business Days.
SSD:
500GB
Form:
Tower
Speed:
3.4GHz
Other:
Certified for PTC Creo
Memory:
32GB
HDD:
No
Graphic Card:
NVIDIA Quadro P4000
Model:
Z840
Storage (GB):
0
Cores:
6
$4,859.00
$1,119.00
(You save
$3,740.00
)
PTC Creo workstations are designed for optimal performance to give you the power you need to efficiently complete your work. Recommended for performance: Processors Speed – Faster the better. Recommend 3Ghz or higher. Processor Cores – Higher core counts are only utilized when rendering. We recommend 4 cores or more. Memory (RAM) – 20x of your compacted central project file is a good rule of thumb. Recommend 16GB or higher. Storage – Faster drives will improve overall workstation responsiveness. Its recommended to use a SSD for the Operating system and program loading, and HDD for file storage. Graphic Card (GPU) - Dedicated video cards supporting DirectX 11 or later are strongly recommended. This workstation is certified to work with PTC Creo.
Processor: Single Intel Xeon E5-2643v3 Six Core 3.4Ghz Processor 6 Cores, 12 Virtual Cores in Hyperthreading Mode! (Additional processor configurations available)
Memory: 32GB DDR4-2133 Memory. Supports up to 512GB of total memory, 16 DIMM slots, 8 channels per CPU
PCIe Solid State Drive: 500GB NVMe M.2 SSD with PCIe Adapter Card
Drive Bays: Up to three 3.5'' or 2.5'' (adapter needed for 2.5'') internal SATA, SAS or SSD hard drives 3 external 52.5'' bays
Raid Controller: SATA RAID level 0, 1, 5 and 10 and SAS RAID level 0, 1, 10 available on motherboard
Graphics: Nvidia Quadro P4000 8GB GDDR5 Graphic Card, DirectX 12 (Certified Hardware for PTC Creo)
Operating System: Windows 10 Professional 64-Bit Pre-Installed
Software: PTC Creo Software is not included
Power Supply: 1125W 90% Efficient wide-ranging, active Power Factor Correction
Optical: DVDRW Drive
Networking Integrated Intel I218LM PCIe GbE Controller
Slots: 2 PCIe Gen3 x16; 1 PCIe Gen3 x16 (when 2nd CPU installed); 1 PCIe Gen2 x4 (when 1 CPU installed) OR PCIe Gen3 x8 (when 2nd CPU installed); 1 PCIe Gen3 x8; 1 PCIe Gen3 x4; 1 PCIe Gen2 x1; 1 PCIe Gen2 x 4 when 1 CPU is installed Transforms to PCIe Gen3 x8 when 2nd CPU installed The PCIe x8 connectors are open ended, allowing a PCIe x16 card to be seated in the slot
Front Ports: 4 USB 3.0; 1 combo headset; 1 microphone
Rear Ports: 4 USB 3.0; 2 USB 2.0; 1 serial; 2 PS/2; 2 RJ-45; 1 audio line in; 1 audio line out
Internal Ports: 2 USB 2.0; 1 USB 3.0
Peripherals: Power Cable Included Mouse, Keyboard, and Video Cable Not Included
Condition: Seller refurbished unit may have minor scratches and scuffs
*Systems are built to order and fully customizable. Please contact us directly to customize a system for you - REQUEST A QUOTE Please note that a stock photo is used and unit may differ depending on configuration.
HP Z840 PTC Creo Workstation E5-2643 V3 6 Cores 3.4Ghz 32GB 500GB NVMe P4000 Win 10
$4,859.00
$1,119.00
(You save
$3,740.00
)
PTC Creo workstations are designed for optimal performance to give you the power you need to efficiently complete your work. Recommended for performance: Processors Speed – Faster the better. Recommend 3Ghz or higher. Processor Cores – Higher core counts are only utilized when rendering. We recommend 4 cores or more. Memory (RAM) – 20x of your compacted central project file is a good rule of thumb. Recommend 16GB or higher. Storage – Faster drives will improve overall workstation responsiveness. Its recommended to use a SSD for the Operating system and program loading, and HDD for file storage. Graphic Card (GPU) - Dedicated video cards supporting DirectX 11 or later are strongly recommended. This workstation is certified to work with PTC Creo.
Processor: Single Intel Xeon E5-2643v3 Six Core 3.4Ghz Processor 6 Cores, 12 Virtual Cores in Hyperthreading Mode! (Additional processor configurations available)
Memory: 32GB DDR4-2133 Memory. Supports up to 512GB of total memory, 16 DIMM slots, 8 channels per CPU
PCIe Solid State Drive: 500GB NVMe M.2 SSD with PCIe Adapter Card
Drive Bays: Up to three 3.5'' or 2.5'' (adapter needed for 2.5'') internal SATA, SAS or SSD hard drives 3 external 52.5'' bays
Raid Controller: SATA RAID level 0, 1, 5 and 10 and SAS RAID level 0, 1, 10 available on motherboard
Graphics: Nvidia Quadro P4000 8GB GDDR5 Graphic Card, DirectX 12 (Certified Hardware for PTC Creo)
Operating System: Windows 10 Professional 64-Bit Pre-Installed
Software: PTC Creo Software is not included
Power Supply: 1125W 90% Efficient wide-ranging, active Power Factor Correction
Optical: DVDRW Drive
Networking Integrated Intel I218LM PCIe GbE Controller
Slots: 2 PCIe Gen3 x16; 1 PCIe Gen3 x16 (when 2nd CPU installed); 1 PCIe Gen2 x4 (when 1 CPU installed) OR PCIe Gen3 x8 (when 2nd CPU installed); 1 PCIe Gen3 x8; 1 PCIe Gen3 x4; 1 PCIe Gen2 x1; 1 PCIe Gen2 x 4 when 1 CPU is installed Transforms to PCIe Gen3 x8 when 2nd CPU installed The PCIe x8 connectors are open ended, allowing a PCIe x16 card to be seated in the slot
Front Ports: 4 USB 3.0; 1 combo headset; 1 microphone
Rear Ports: 4 USB 3.0; 2 USB 2.0; 1 serial; 2 PS/2; 2 RJ-45; 1 audio line in; 1 audio line out
Internal Ports: 2 USB 2.0; 1 USB 3.0
Peripherals: Power Cable Included Mouse, Keyboard, and Video Cable Not Included
Condition: Seller refurbished unit may have minor scratches and scuffs
*Systems are built to order and fully customizable. Please contact us directly to customize a system for you - REQUEST A QUOTE Please note that a stock photo is used and unit may differ depending on configuration.
3 Year TekBoost Warranty with Next Business Day Part Replacement. Option to add On-Site Service and/or Upgrade to 5 Years is Available.